High Mast LED Light

High mast LED lights are used for lighting systems that need to cover a very large area, such as in stadiums, billboards and large intersections. Our high mast LED lights are highly effective and provide wide lighting range.

  • BRHPL-A1 High Mast Pole
  • BRHPL-A1 High Mast Pole
  • BRHPL-A2 High Mast Pole
  • BRHPL-A2 High Mast Pole
Material Test for high post lamps
1. All of our materials are purchased from trusted sources.
2. A mill certificate issued by the mill factory with stamp and signature must be provided before unloading the material in our factory, otherwise we will refuse delivery.
3. Before producing, all the material must pass the chemical and physical analysis to make sure that they have met the requested strength components.

Testing Including
1. Material Testing
2. Shape Testing
3. Testing after Galvanization
4. Tensile Testing
5. Fittings Checking

We manufacture of high mast lighting poles with heights from 12-50m

Height From 12M to 50M
Applications Airport, seaport, plaza, stadium, highway station, intersections ,etc
Shape Round, Multi-pyramidal, Column form, polygonal or conical
Material Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
Torrance of dimension +- 2%
Lighting Source 400 W- 5000 W high pressure sodium flood light, light extension :up to 30 m ² /100W-250W LED
Light plate Various figure of selection ,material with hot dip galvanization steel frame
Lifting system Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute
Equipped e; ant ferromagnetism brake and break – proof device, manual operation applied under power cut
Electric appliance control device Electric appliance box to be the hold of the pole, lifting operation can be 5 meters away from the pole through a wire. Time control and light control can be equipped to realize full-load lighting mode and part lighting mode
Surface treatment Hot dip galvanization, ASTM A 123, color polyester power or any other standard by client required.
Joint of Poles insert mode, inner flange mode, and face to face joint mode.
Design of pole Can withstand an earthquake up to an 8 grade
Wind Speed 160 Km/Hour
Welding Internal and external double welding
Thickness 6 mm to 30 mm
Production Process Raw material test → Cutting → Molding or bending → Welding (longitudinal ) → Dimension verify → Flangewelding → Hole drilling → Calibration → Deburr → Galvanization or powder coating, Painting → Recalibration → Thread → Packaging

Lifting system For High Mast Lamp
Latch barrel with inner mounting bracket locker is mounted to an underside of the mast-top pulley assembly. Furthermore, all steel cables are not exposed and are more effectively protected.

A latching mechanism fitted on steering arms is able to release strain on steel cables when in the operation position. The process of latching on and off is stable and without vibration. The bumper is designed on the luminary mounting bracket for avoiding direct damage between mast-top assembly and the raising luminary mounting bracket.
The leveling device for luminary support bracket is easy to operate and convenient to adjust the level.

High Post Lamps Application
Plaza High Mast Lighting
Airport High Mast Lighting
Highway High Mast Lighting
Storage-yard High Mast Lighting
Industrial-plant High Mast Lighting
Park High Mast Lighting
Dock High Mast Lighting
Stadiums High Mast Lighting
Overpass High Mast Lighting
Toll-station High Mast Lighting

Producing Capacity
Within 30 days for 30 high mast lighting poles on receipt of payment

Bulb wrappings for high mast lighting poles, individual cartons for lamps and controlling equipments, etc. A 40' HP loads 7-20M/ 6-25M/ 5-30M/ 4-35M high mast lights.

Inquiry Form